MaxiMac 2000 June/MaxiMac 103.iso/KitWeb/Club Internet/Hotline/Scripts Modems/Viking/Viking Components K56/Viking Components K56

Text File | 1997-05-16 | 4.6 KB | 277 lines | [mlts/slnk]

!  Farallon Netopia ISDN 56K
!    Author:    Kris Kreutzman
!
!    Copyright:    © 1991-1996 Apple Computer, Inc.    All Rights Reserved.
!
!    revision history:
!        v2.1    as shipped with the ARA 2.1
!
!  'mlts' resource info for this modem:
!    byte 1 == 01 -> modem HAS built-in error correction protocols
!    byte 2 == 01 -> modem HAS built-in data compression protocols
!    byte 3 == 40 -> max number of chars in varstr 7
!    byte 4 == 40 -> max number of chars in varstr 8
!    byte 5 == 40 -> max number of chars in varstr 9
!
@ORIGINATE
@ANSWER
!
! ---- Initial modem setup ----
!
! Set serial port speed
!
serreset 57600, 0, 8, 1
!
@LABEL 2
hsreset 0 0 0 0 0 0
settries 0
!
! Get the modem's attention
!
matchclr
matchstr 1 3 "OK\13\10"
write "AT\13"
matchread 30
!
@LABEL 3
!
! Setup the modem for the following:
!   Reset to factory settings
!   Standard compression/reliablity
!   Lock serial port speed
!   Serial port hardware handshaking, turn off software handshaking
!   Verbose responces and compression/protocol results
!   CONNECT returns DCE speed
!   Turn off answering
!   Reset or return to command mode on DTR toggle (optional)
!
matchclr
matchstr 1 4   "OK\13\10"
matchstr 2 101 "ERROR\13\10"
write "AT&FE0S0=0\13"
matchread 30
inctries
iftries 3 101
!
! Reset the Modem on setup failure
!
DTRClear
pause 5
DTRSet
flush
jump 3
!
!
@LABEL 4
!
! Modem ready, wait for a call or originate a call
!
@LABEL 13
ifANSWER 32
!
!
! ---- Originating a call ----
!
@LABEL 19
! Display the full dialstring contained in Varstring 1
note "Dialing ^1" 3
!
! Varstrings 7, 8 and 9, contain dialstring fragments
!    Long phone numbers may need to be split into smaller groups
!    for the modem to use
!
! Varstring 3:  "p" for pulse & "t" for tone dialing
! Varstring 8 == blank (dialstring in varstring 7)
! Varstring 9 == blank (dialstring in varstrings 7 & 8)
! Otherwise (dialstring in varstrings 7, 8 & 9)
ifstr 8 27 " "
ifstr 9 24 " "
!
!  Write dialstring in varstrings 7, 8 & 9
matchclr
matchstr 1 21 "OK\13\10"
write "ATD^7;\13"
matchread 400
jump 101

@LABEL 21
matchclr
matchstr 1 22 "OK\13\10"
write "ATD^8;\13"
matchread 400
jump 101

@LABEL 22
write "ATD^9\13"
jump 32
!
!
@LABEL 24
!  Write dialstring in varstrings 7 & 8
matchclr
matchstr 1 25 "OK\13\10"
write "ATD^7;\13"
matchread 400
jump 101

@LABEL 25
write "ATD^8\13"
jump 32
!
@LABEL 27
!  Write dialstring in varstring 7
write "ATD^7\13"
!
!
!    ---- Connection responce ----
!
! The following section will parse modem responces:
!
@LABEL 32
matchclr
matchstr  1  81 "RING\13\10"
matchstr  2 102 "NO DIALTONE\13\10"
matchstr  3 103 "NO CARRIER"
matchstr  4 103 "ERROR\13\10"
matchstr  5 104 "BUSY\13\10"
matchstr  6 105 "NO ANSWER\13\10"
matchstr  7  33 "CARRIER "
matchstr  8  34 "CONNECT "
matchread 700
ifANSWER 32
jump 105
!
@LABEL 33
matchclr
matchstr  1  56 "56000"
matchstr  2  58 "64000"
matchread 10
jump 32
!
@LABEL 34
matchclr
matchstr  1  56 "56000"
matchstr  2  58 "64000"
matchread 10
jump 60
!
! -- Connection rates --
! CommunicatingAt informs ARA of the raw modem to modem
! connection speed.
@LABEL 56
note "Communicating at 56000 bps." 2
CommunicatingAt 56000
jump 60
!
@LABEL 58
note "Communicating at 64000 bps." 2
CommunicatingAt 64000
jump 60
!
!
! -- Normal exit after "CONNECT" --
!
!  This modem has been setup to do CTS handshaking,
!  and we assume that a CTS handshaking cable is being used.
!
@LABEL 60
! Turn on CTS handshaking.
HSReset 0 1 0 0 0 0
!
ifANSWER 71
pause 30
@LABEL 71
exit 0
!
!
! ---- Answer calls ----
!
!    A RING result from the modem and in ANSWERING mode
!    claims the serial port and answering the phone
!
@LABEL 81
ifORIGINATE 32
userhook 1
note "Answering phone..." 2
write "ATA\13"
jump 32
!
!
! ---- Hang up and reset modem ----
!
@HANGUP
@LABEL 90
settries 0
HSReset 0 0 0 0 0 0
!
@LABEL 92
!  Escape from data to command mode
matchclr
matchstr 1 96 "OK\13\10"
write "+++"
matchread 20
!
@LABEL 94
! Force a hangup
matchclr
matchstr 1 98 "NO CARRIER\13\10"
matchstr 2 98 "OK\13\10"
matchstr 3 98 "ERROR\13\10"
matchstr 4 98 "0\13\10"
write "ATH\13"
matchread 30
!
! Try to get control of the modem by toggling DTR
DTRClear
pause 5
DTRSet
flush
!
! Try the hangup sequence three times otherwise declare and error
inctries
iftries 3 101
jump 92
!
@LABEL 96
! Pause between data and command mode
pause 50
jump 94
!
!
@LABEL 98
! Recall the factory settings
pause 15
matchclr
matchstr 1 99 "OK\13\10"
write "AT&F\13"
matchread 30
jump 101
!
@LABEL 99
exit 0
!
! ---- Error messages -----
!
! Modem Not Responding
@LABEL 101
exit -6019
!
! No Dial Tone
@LABEL 102
exit -6020
!
! No Carrier or Error
@LABEL 103
exit -6021
!
! Busy
@LABEL 104
exit -6022
!
! No Answer
@LABEL 105
exit -6023
!
! User Cancellation
@LABEL 107
exit -6008